Description
EPOXYBOND® Pool Putty is a unique two-part, hand-moldable epoxy putty specially formulated for concrete or Gunite pool repairs. The convenient cartridge form provides a simple, equal mixing ratio (1 to 1). Just cut, mix and fix. There is no need to drain pools to repair leaks and cracks because EPOXYBOND® Pool Putty hardens under water. Once cured, it will not shrink or sag. Sold individually, 14 oz. units
- COVERAGE: One 14 oz. set will cover approximately 11.7 cubic inches or .0067 cubic feet.
- MIXING AND APPLICATION
- Under Water Repairs 1. Area to be repaired must be free of loose particles, slime and algae. 2. Mix equal amounts of Resin and Hardener thoroughly, above water, until putty is uniform in color. 3. For best adhesion, press putty firmly into areas requiring repair.
- Above Water Repairs 1. Area to be repaired must be thoroughly cleaned. Remove grease, loose particles and rust. For best adhesion, roughen surface with wire brush or sandpaper. 2. Mix equal amounts of Resin and Hardener thoroughly until putty is uniform in color. 3. For above water repairs, the putty can be contoured or smoothed by carefully rubbing with a wet sponge.
