Description
EPOXYBOND® Pool Paste is a high-strength epoxy paste ideal for replacing tiles on hot tubs, spas and pools; for repairing cracked skimmers and baskets; replacing nonskid strips; and repairing broken or cracked vacuum brushes or accessories. When applied properly, EPOXYBOND® POOL PASTE has excellent non-sagging and non-dripping properties. EPOXYBOND® POOL PASTE can be used to repair hairline cracks in plastic pipe, concrete, fiberglass and wood and to repair saunas or whirlpools. EPOXYBOND® POOL PASTE is specially formulated for adhesion to plastics. Easy 1-to-1 mix; it will bond to glass, wood, steel, iron and ceramics. EPOXYBOND® POOL PASTE can be painted after complete cure and light sanding.
- EPOXYBOND® POOL PASTE, 18 x 16 oz. (454 g.) sleeved set
- each set contains: 1 can of Resin – 8 oz. (227 g.), 1 can of Hardener – 8 oz. (227 g.)
- MIXING AND APPLICATION
1. Clean and dry area to be repaired. Thoroughly remove all grease, loose particles, rust. Steel wool or sandpaper will remove paint, rust or loose particles. Do not apply underwater.
2. Place equal amounts of Resin and Hardener onto a clean, disposable surface.
3. Mix Resin and Hardener with clean tool until uniform color is attained.
4. Immediately spread thin film evenly over surface, removing excess.
5. Use tape where necessary to hold repair in position until paste hardens.
