Description
Inlays Vinyl Stick-On Installation Kit comes with BOSS PRO 635C clear adhesive spray, Flex-Tred Edge Sealing Compound, and soft plastic squeegee tool to help ensure proper installation. The kit will installs qty: 40 of the 6″ x 6″ Vinyl Stick-On Markers and/or qty: 20 of the 8″ x 8″ Vinyl Stickon Markers.
REQUIRED for installation of Vinyl Stick-On Depth Markers
- Prepare Surface: Surface should be a dry flat plane, free of loose debris. High spots should be ground off and voids filled
- Spray Adhesive: Mask off the perimeter to reduce clean up. Spray the deck application area with aerosol adhesive. Allow spray adhesive to dry for 15 minutes.
- Install Stick-On: Remove paper backing from the stick-on. Apply the stick-on to the sprayed area. Firmly press the entire stick-on surface with a squeegee to eliminate air pockets.
- Edge Sealer: Apply edge sealing compound to the entire perimeter of the stick-on. Important: Make sure edge sealer overlaps both the stick-on and the deck surface to ensure a moisture proof seal. Allow stick-on to set overnight before permitting traffic. Save the installation kit for any future installations or repairs. Reapply as needed throughout the season or years.
Edge Sealer Sold Separately if needed: 1597-ES
