Description
⚡ Gecko® in.ye-5 Circuit Board — 33-0045A-K — HydroQuip EasyPak EP2000 / EP3000 Y Series
Genuine Gecko® replacement PCB for HydroQuip EasyPak EP2000 and EP3000 Y Series spa control systems.
⚠️ IMPORTANT — PLEASE READ BEFORE ORDERING
- This is a Gecko® / HydroQuip board — not a Balboa board. The 33-0045A-K is the genuine Gecko in.ye-5 Y Series PCB for HydroQuip EasyPak EP2000 (manufactured after June 2018) and EasyPak EP3000 (manufactured after June 2020) control systems. Confirm your existing system before ordering.
- Version 1 vs Version 2 — check connector P66 before installing. The board ships in two versions. The location of connector P66 on the board determines which version you have. Version 1 boards are only compatible with Gecko in.Therm heaters. Version 2 boards work with in.Therm heaters or with any standard pressure or flow switch — without any modification to the board. Check your existing control system documentation to confirm which version is required.
- Circ Pump and Ozone must be the same voltage. If both are used simultaneously, they must be wired to the same voltage AND the AMP Splitter Harness (PN 9920-401369) is required.
- Compatible with ECO-3 in.Link Digital topsides. This board requires a compatible Gecko Y Series topside keypad. See the compatibility section for confirmed models.
- Non-returnable. Circuit boards cannot be resold to another owner as new once purchased. Confirm compatibility before ordering. Damage from incorrect installation is also not covered under warranty.