Description

The SECO 00072282 is a solid carbide multi-directional turning (MDT) insert designed for precision grooving and turning operations on CNC lathes and turning centers. This insert carries the LCMF160504-0500-MT designation, featuring a micrograin carbide substrate with a CP500 manufacturer grade and a PVD coating for extended tool life and thermal resistance. It has a neutral hand orientation, a double-ended configuration, and an MT chipbreaker geometry suited for controlled chip formation across a range of workpiece materials. Cutting height is 0.177 inches and maximum cutting width reaches 0.197 inches, making it well-suited for narrow-groove and face-grooving applications.

This insert is applied in machining environments where multi-directional cutting capability is required. It is rated for use across a broad spectrum of workpiece material codes including hardened materials (H), cast iron (K), stainless steel (M), non-ferrous materials (N), steel (P), and heat-resistant superalloys (S). Typical install scenarios include production turning shops and job shops running medium to high production volumes on CNC turning equipment. The double-end design maximizes insert utilization before replacement.

Key Features

Solid carbide micrograin substrate with CP500 grade for wear resistance in demanding cuts
PVD coating process extends edge life and reduces built-up edge on difficult materials
Double-ended insert design provides two usable cutting edges per insert
MT chipbreaker geometry promotes controlled chip evacuation during grooving operations
Neutral hand orientation allows flexible application on multiple toolholder configurations
Compatible with primary workpiece material codes H, K, M, N, P, and S

Compatibility

Designed for use in MDT series toolholders accepting LCMF insert style with an insert seat size of 5. Compatible with workpiece materials coded H, K, M, N, P, and S per the supplier specification.

Installation Notes

Installation is performed by CNC machinists and tooling technicians. The machine spindle must be fully stopped and the turret indexed to a safe position before seating or replacing inserts. Use a calibrated torque wrench and the toolholder manufacturer’s recommended clamping hardware to secure the insert without over-torquing the clamp screw. Verify insert seating and edge orientation before resuming cutting operations.