Description
⚙️ Gecko Aqua-Flo Flo-Master FMCP Spa Pump — 3/4 HP 2-Speed 115V 48-Frame Center Discharge (02607000-1010)
Compact, high-performance dual-speed jet pump with flow rates that outperform the competition
♨️ Product Overview
The Gecko Aqua-Flo Flo-Master FMCP 02607000-1010 is a 3/4 HP (0.75 operational HP / 1.0 HP total) dual-speed jet pump engineered by Aqua-Flo by Gecko (Gecko Alliance Group) for portable spas, whirlpools, hot tubs, and above-ground pool applications. Operating at 115V/60Hz, this compact 48-frame thru-bolt pump draws 7.8 Amps on high speed and 3.2 Amps on low speed, delivering up to 60 GPM (Hi-Flo) through its unique high-performance impeller design. The FMCP features center discharge — both suction and discharge exit from the center/top of the pump housing — with 1-1/2″ MBT (Male Buttress Thread) connections measuring approximately 2-3/8″ outside diameter across the threads. Designed with Aqua-Flo’s signature high-flow impeller that provides flow rates exceeding all tested competition, the FMCP allows you to use a lower HP pump for the same job — meaning less operating cost. Each pump includes two quick-release compression fittings (unions) with O-rings for easy installation and maintenance, but does NOT include a pump cord. The pump features a compact, unitized, single-spring elastomer bellows mechanical seal for maximum durability and watertight operation, built-in thermal overload protection, and reinforced engineered plastic construction. Backed by Gecko Alliance — headquartered in Québec, Canada with over 25 years of experience in spa control systems and pump manufacturing. The Flo-Master FMCP is one of the most widely used OEM spa pumps in North America, found as factory equipment in spas from Marquis, and many other brands.
✨ Key Features
3/4 HP Dual Speed — 7.8A High / 3.2A Low @ 115V/60Hz — High speed for powerful jet massage and low speed for quiet filtration and circulation
60 GPM Hi-Flo Performance — Aqua-Flo’s unique high-performance impeller provides flow rates that exceed all tested competition at this horsepower
Center Discharge (CD) Configuration — Both suction and discharge from the center/top of the pump housing for versatile plumbing layouts
48-Frame Thru-Bolt Motor — Compact design ideal for tight equipment bays in portable spas and whirlpool baths
1-1/2″ MBT Connections — Male Buttress Thread on both suction and discharge (approximately 2-3/8″ outside diameter across threads)
Elastomer Bellows Mechanical Seal — Compact, unitized, single-spring design for maximum durability and watertight continuous operation
Built-In Thermal Overload Protection — Motor automatically shuts down if overheating is detected, protecting against damage
Reinforced Engineered Plastic Construction — Corrosion-resistant wet end housing built for long-term spa environment exposure
Quick-Release Compression Fittings Included — Two unions with O-rings for easy installation and maintenance — hand-tighten only
Adapts to Hair & Lint Traps — Compatible with self-priming applications when used with optional hair and lint trap
115V Plug-In Convenience — Operates at 115V (110-120V) for standard household electrical service
Proven OEM Platform — Factory-installed in spas from Marquis and many other manufacturers — direct replacement available
