Sale!

Lasco Elbow, 1/2″ Slip White PVC Schedule 40 90 Degree | 406-005

Original price was: $5.99.Current price is: $1.80.

SKU: 406005 Category: Tag:

Description

Lasco 406005 (406-005) Schedule 40 PVC 90° Elbow – 1/2″ Slip x Slip – White

The Lasco 406005 (also listed as 406-005) is a Schedule 40 PVC 90-degree elbow with 1/2″ slip (socket) connections on both ends. It’s used to make a clean 90° turn in 1/2″ PVC plumbing for pool & spa equipment pads, irrigation, and general water systems that use solvent-weld PVC fittings.

Key Features

  • Part Number: 406005 (406-005)
  • Fitting Type: 90° elbow
  • Size: 1/2″ (nominal pipe size / IPS)
  • Connections: 1/2″ Slip (socket) x 1/2″ Slip (socket)
  • Material: Schedule 40 PVC
  • Color: White
  • Typical max service temperature: Up to 140°F (PVC pressure applications)

Common Uses

  • Small plumbing turns on pool/spa accessory lines and equipment pads
  • Irrigation laterals and small manifold branches
  • General-purpose water plumbing using solvent-weld PVC

Installation Notes

  • Slip sockets are solvent-weld: Use PVC primer and PVC cement rated for pressure plumbing.
  • Prep matters: Deburr/chamfer pipe ends and keep sockets clean/dry for the strongest joint.
  • Full insertion: Seat pipe fully into the sockets and hold briefly to prevent push-back.
  • Cure time: Allow proper cure time before pressurizing (varies by cement type, temperature, and humidity).
  • Reduce pipe stress: Support the line so the elbow isn’t forced to carry misalignment or vibration.

Related Products

  • Search: Lasco 406005 / 406-005
  • Search: 1/2″ Schedule 40 PVC Pipe
  • Search: 1/2″ Schedule 40 PVC Couplings
  • Search: 1/2″ Schedule 40 PVC Tees
  • Search: Lasco 429005 (1/2″ Slip Coupling)
  • Search: PVC Primer
  • Search: PVC Cement
  • Search: Lasco Schedule 40 PVC Fittings

Installation & Maintenance Tips

  • Dry-fit your layout first to confirm alignment and spacing before gluing.
  • Use fresh primer/cement and follow the cement manufacturer’s cure-time chart before starting the system.
  • Avoid forcing misaligned plumbing into place—pipe strain is a common cause of hairline cracks and leaks over time.
  • After startup, inspect joints for seepage and correct any alignment/support issues immediately.