Description
Lasco 406010 (406-010) Schedule 40 PVC 90° Elbow – 1″ Slip x Slip – White
The Lasco 406010 (also listed as 406-010) is a Schedule 40 PVC 90-degree elbow with 1″ slip (socket) connections on both ends. It’s used to make a clean 90° turn in 1″ PVC plumbing for pool & spa equipment pads, water features, irrigation, and general water circulation systems.
Key Features
- Part Number: 406010 (406-010)
- Fitting Type: 90° elbow
- Size: 1″ (nominal pipe size / IPS)
- Connections: 1″ Slip (socket) x 1″ Slip (socket)
- Material: Schedule 40 PVC
- Color: White
- Typical max service temperature: Up to 140°F (PVC pressure applications)
Common Uses
- 90° turns on 1″ pool/spa return and feature lines
- Equipment pad plumbing for smaller suction/return runs
- Irrigation manifolds and general water plumbing
Installation Notes
- Slip sockets are solvent-weld: Use PVC primer and PVC cement rated for pressure plumbing.
- Dry-fit first: Confirm alignment and clearance before gluing.
- Full insertion: Deburr/chamfer pipe ends and seat pipe fully into the sockets for maximum joint strength.
- Support the line: Use pipe supports to reduce stress that can crack fittings over time.
- Cure time: Allow proper cure time before pressurizing (varies by cement type, temperature, and humidity).
Related Products
- Search: Lasco 406010 / 406-010
- Search: 1″ Schedule 40 PVC Pipe
- Search: 1″ Schedule 40 PVC Couplings
- Search: 1″ Schedule 40 PVC Tees
- Search: 1″ PVC Unions
- Search: PVC Primer
- Search: PVC Cement
- Search: Lasco Schedule 40 PVC Fittings
Installation & Maintenance Tips
- Mark pipe insertion depth so each joint seats fully during assembly.
- Hold the joint for a few seconds after assembly to prevent pipe push-back.
- Avoid forcing misaligned plumbing into place—pipe strain can lead to leaks or cracks over time.
- If the elbow is near equipment that may be serviced, consider adding a union nearby to avoid cutting pipe later.
