Description
LIMITED STOCK AVAILABLE DUE TO ITEM BEING DISCONTINUED.
Paramount Pool Products Pool Valet® 1-Hole Nozzle.
The Pool Valet® Nozzle is manufactured by Paramount Pool Systems. Each hole on the Pool Valet® is either 1/4 inch or 3/8 inch. The nozzle comes with 4 partial holes in it. Only one or two are drilled out all the way. The nozzle can be ordered as a blank and it is left to the installer to drill out the proper holes.
*Note: Blank nozzles will cause the pump to dead head out if you do not drill out the hole in the nozzle.
Broken Pool Valet® Nozzles:
- Remove the nozzle threaded ring with the metal hand tool.Then replace the nozzle with a new nozzle that has the same size hole. When a nozzle breaks there is usually a reason and most of the time it is because debris has plugged one or more of the nozzles in that circuit so check all nozzles on the circuit(zone)for debris.
- If the threaded part of the body in the plaster is broken it can be repaired with a pool valet retro kit.
Part Numbers: 004-502-5002-01,004-502-5002-02,004-502-5002-03,004-502-5002-04,004-502-5002-08
