Description
Vinyl Works C24P2-T Premium 24″ Resin Pool Fence Kit (Add-On) – 2 Sections, Taupe
The Vinyl Works C24P2-T is a 24″ tall premium resin fence add-on kit designed for above-ground pool safety fencing. This kit adds two fence sections to an existing compatible 24″ Premium fence layout and mounts directly to the pool’s vertical upright posts using adjustable, telescoping mounting brackets for a better fit on many pool styles. The taupe resin construction is maintenance-friendly and made for outdoor, poolside conditions.
Key Features
- 24″ high fence system add-on kit (2 sections)
- Taupe UV-stabilized resin components for outdoor durability
- Mounts to above-ground pool uprights (vertical posts) using bracket system
- Telescoping bracket design helps accommodate different pool top-rail cap clearances
- Recommended for use with compatible Vinyl Works decks, entry systems, and ladders to help enclose the pool area
What’s Included
- (2) Line posts
- (4) Fence rails
- (24) Fence pickets
- (2) Mounting brackets
- (2) Post caps
- (4) 14 x 1″ bracket mounting screws
- (20) 8 x 3/4″ fence rail screws
- (2) 1/4″ x 3/4″ post bolts
- (2) 1/4″ washers
- (2) 1/4″ hex nuts
Compatibility Notes
- This is an add-on kit intended to expand an existing compatible 24″ Premium fence layout (not a full base kit by itself).
- Designed to mount to the pool’s vertical uprights. Confirm you have adequate upright spacing and mounting surface.
- Fence sections are typically cut-to-fit during installation so each section can match your post-to-post distances.
Installation & Use Tips
- Mount brackets beneath the top rail connector caps when possible for strength (follow your fence instructions).
- Tighten hardware evenly; avoid overtightening screws to prevent stripping.
- Measure post-to-post spans carefully and cut rails square so pickets stay plumb.
Related Products
- Vinyl Works 24″ Premium Fence Base Kits
- Vinyl Works 24″ Fence Gates
- Fence Connector Kits (Deck / Ladder / Step Connections)
- Deck Gate Latches & Hardware
- Stainless Hardware (Pool-Side Screws & Fasteners)
Maintenance Tips
- Rinse fencing periodically to remove sunscreen residue, dirt, and chemical splash.
- Wash with mild soap and water; avoid harsh solvents and abrasive pads that can dull resin surfaces.
- Check posts and bracket hardware at the start of the season and after temperature swings; snug as needed.
- Inspect rails/pickets for UV brittleness over time and replace damaged components to maintain a secure barrier.
